CS85

CS85

cutting
The CS 85 Air Operated Underpinner can be used from front or rear simply by turning the top of the machine (no tools needed). The CS 85 is the lowest cost air powered machine on the market. A great choice for the small framer wanting an air operated machine.

  • Floor stand machine with reversible joining table.
  • Joining angle can be adjusted (+-90 degrees) to correct the gap if the cutting angle is not perfect.
  • No adjustment required for top presser when changing from small to tall mouldings within 2″ difference in height.
  • No adjustment when changing from soft wood to hard wood.
  • No adjustments or parts changing for different wedge sizes.
Technical Data:
Minimum moulding width: 1/8″
Minimum moulding height: 1/4″
Furthest stapling position from back: 3″
Wedge sizes: 5, 7, 10, 12 & 15 mm in normal and hardwood
Dimensions: L 20″ x D 20″ (without extension table) x H 44″
Weight: 88 lbs.
Air Pressure: 80-105 lbs. p.s.i.
Air Consumption: 0.1 c.f.m. per cycle
CS85
Technical Data:
Minimum moulding width: 1/8″
Minimum moulding height: 1/4″
Furthest stapling position from back: 3″ (measured along 45 degree cut)
Wedge sizes: 5, 7, 10, 12 & 15 mm in normal and hardwood
Dimensions: L 20″ x D 20″ (without extension table) x H 44″
Weight: 88 lbs.
Air Pressure: 80-105 lbs. p.s.i.
Air Consumption: 0.1 c.f.m. per cycle

More Underpinners: CS1CS2 | CS20MACH1 | CS88 | CS89 | CS199M XL | CS299M XL2 | CS4008 XL